Using the AC adaptor
Your clock radio is supplied with a Mains Adaptor.
1.Place your clock radio on a flat surface.
2.Insert the adaptor plug into the DC socket located on the rear of your clock radio.
3.Plug the adaptor into a standard 13 amp mains socket outlet. Whenever the adaptor is used, the batteries are automatically disconnected.
The AC adaptor should be disconnected from the mains supply and the radio when not in use. The AC adaptor for use with the CR9952 should provide 4.5 volts DC output at 300mA, centre pin negative.
We would recommend for economy that your radio is used via the AC adaptor whenever possible with battery operation for occasional or
11
