Roberts Radio CR9955 Switching on, Setting the time manually, See section on Back-up battery on

Switching on

1.Place your clock radio on a flat surface. Plug the power cord into the wall socket and switch on.

2. After a few seconds the time, day and date will set automatically. Your clock radio is fitted with a long life back-up battery to maintain the factory set time, day and date. Your clock radio will automatically reset to the correct time should the power source be interrupted. It will also automatically adjust for summer/winter time.

See section on Back-up battery on page 15 .

Should the time, date or year require adjustment follow the procedure shown in the next sections.

Setting the time manually

1. Press and hold down the Time button.

2. Whilst holding down the Time button press the Up or Down buttons to set the time. Release the buttons when the correct time is reached.

12

The clock uses a 12 hour display with a PM indicator. Ensure that	2
the correct 12 hour cycle is selected.

If you need any further advice, please call our Technical Helpline on :- 6

020 8758 0338 (Mon-Fri)