![](/images/new-backgrounds/1198066/19806611x1.webp)
Listening to the Radio
1.Switch on your CD clock radio by pressing the Power On button. The Power indicator LED will light.
2.Slide the Function switch to the required waveband.
3.Tune in to the desired station by rotating the Tuning control. The station frequency is indicated in the dial scale.
The Wire aerial located on the rear of your CD clock radio is for FM reception. The wire should be fully extended and positioned for optimum reception.
For MW reception there is a built in ferrite aerial. Rotate your CD clock radio to the position giving best reception.
4.Adjust the volume by rotating the Volume control.
5.When the Function switch is set to FM and the station being received is an FM Stereo station the FM Stereo indicator will light.
6.The radio can be switched off by pressing the Power Off button. The Power indicator will switch off.
1
2
5
3
4
6
6