Operating your radio - FM
1. | Fully extend the telescopic aerial. |
|
2. | 1 | 3 |
Press the On/Off button to switch on your radio. If in DAB mode, the |
|
radio will tune to the previous DAB station.
3. | Press the Band button to select the FM band. |
|
4. | Press and immediately release the | 4,7 |
scan in an upwards direction (low frequency to high frequency) and stop automatically when it finds a station of sufficient strength.
5. If RDS information is available after a few seconds the display will update and show station name.
6.To find other stations press and release the
7. | To scan the FM band in a downwards direction (high frequency to |
|
| low frequency) press and hold down the |
|
| display shows the radio frequency changing. | 9 |
|
| |
8. | When the waveband end is reached your radio will recommence tuning | 9 |
| from the opposite waveband end. |
|
9. | Adjust the Volume control to the required settings. |
|
10. | To switch off your radio press the On/Off button. | 1 |
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 | 10 |
|