Mains operation
1.Place the unit on a flat surface. Plug the mains lead into a wall socket and switch on the wall socket.
2.The display will show "Clock Setting..." for a few seconds before returning to clock display.
3.The clock radio will attempt to set the clock from a DAB signal. If a signal is found then the time will be displayed. If no suitable signal is found, the radio will display "Clock N/A" and will then display a time of 00:00. If this happens it is not a fault. The time should be set once a DAB signal is being received, see page 5.
Please note the time must be set before the alarm function can be used.
•The mains plug is used to connect your apparatus to the AC mains supply. In order to completely disconnect the apparatus from the AC mains supply, the mains plug should be removed from the mains socket outlet.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 | 4 |