Memory tuning

You may store up to 25 stations in memory. 10 on FM, 10 on medium wave and 5 on long wave.

Tune in the desired station as previously described.

Press the memory button (8) to open the memory a flashing 'M' will appear in the display. While the 'M' is flashing press one of the preset buttons on

which you want to store the station. Press the memory button (8) to storeFM the station and close the memory. Repeat this procedure for the other 4

presets.

Note memory tuning can only be carried out while the 'M' in the display is flashing.

On FM and MW a further 5 stations can be preset.

To set preset memory 6.

Press the memory button (8) to open the memory a flashing 'M' will appear in the display. While the 'M' is flashing press the +5 button (20) and then press preset button 1. Press the memory button (8) to store the station and close the memory. The display will show 6 in the top right hand corner.

To set preset memory 7.

Press the memory button (8) to open the memory a flashing 'M' will appear in the display. While the 'M' is flashing press the +5 button (20) and then press preset button 2. Press the memory button (8) to store the station and close the memory. The display will show 7 in the top right hand corner.

Repeat this procedure for presets 8-10.

To recall a station from preset memory

First select the waveband then press the required preset button. Presets 6- 10 are accessed by pressing the +5 button followed by the required preset button. e.g. to recall preset memory 8 press the +5 button followed by preset button 3. Preset memories 6-10 are only available on FM and MW.

M

MHz

5

Page 6
Image 6
Roberts Radio R737 manual Memory tuning, To recall a station from preset memory