VH102 OPERATING CONTROLS
RESETTING YOUR VORNADO HEATER
43
2
1
3FAN
1POWER ON/OFF
Illuminated when the unit is ON.
2THERMOSTAT
Allows you to select your desired comfort level.
For fan only use - select the FAN setting and press CONT. on the FAN switch.
Your Vornado Heater has a
1. | Set the POWER switch to OFF and unplug the unit. |
2. | Remove any obstructions. |
3. | Wait 5 |
4. | Plug in the unit and place in desired position. |
In the AUTO position, the fan will cycle on and off with the heating element. In the CONT. position, the fan will run continuously.
4HEAT
(I) LOW HEAT 750 watts
(II)MEDIUM HEAT 1125 watts
(III)HIGH HEAT 1500 watts
VH2 OPERATING CONTROLS
5. Set the POWER switch to ON. Your Vornado Heater should now |
function normally. |
If the safety |
will not reset after following the above procedure, DO NOT |
ATTEMPT TO DISASSEMBLE THE UNIT. Call Vornado Consumer |
Services Department |
4 | 3 |
2
1
1POWER ON/OFF
Illuminated when the unit is ON.
2THERMOSTAT
Allows you to select your desired comfort level.
3FAN
In the AUTO position, the fan will cycle on and off with the heating element. In the CONT. position, the fan will run continuously.
| 4 HEAT |
| LOW HEAT 750 watts |
6 English | HIGH HEAT 1500 watts |
|