Setting the HWS (Humane Wake System) alarm
A bleep tone will sound when using the HWS alarm. The alarm bleep will increase in volume every 15 seconds for one minute followed by one minutes silence before repeating the cycle. The HWS alarm will sound for one hour unless turned off by pressing the Power button. Pressing the Power button whilst the alarm is sounding will cancel the alarm for 24 hours.
1.The HWS alarm time can be set with the radio switched on or off.
2.Press and hold down the Alarm On/Off button until the hour digits and alarm symbol flash in the display.
3.Repeatedly press the Alarm mode button until the display shows
ALARM 
.
4.Set the required hour using the Tuning up/down buttons.
5.Press the Time set button, the minute digits will flash in the display.
6.Set the required minute using the Tuning up/down buttons.
7.Press the Time set button to complete alarm setting.
8.To permanently cancel the alarm press and hold down the Alarm On/
Off button until the ALARM 
symbol is removed from the display.
If you need any further advice, please call our Technical Helpline on :-
A larm
O n / O ff
Mo d e
/ 
Tuning
Manual/Auto Seek
B an d
Tim e
S e t
Tuning
Manual/Auto Seek
B an d
Tim e
S e t
ALARM
ALARM 
ALARM 
ALARM 
ALARM 
ALARM 
0181 758 0338 | 14 |
|
