Operating the radio

1.Your radio is equipped with four tuning methods:- Scan tuning, Rotary tuning, Manual tuning, and Memory preset tuning.

Scan tuning

1.Press the Power button to turn on the radio.

2.Select the required waveband by repeatedly pressing the Band button. For the FM waveband fully extend the Telescopic aerial and set it at an angle of 45 degrees.

3.Press and hold down either the Tuning up or Tuning down buttons for more the 0.5 sec to commence scan tuning.

4.The radio will scan the selected waveband and stop automatically when

it finds a station of sufficient strength. The tuning indicator will appear in the display.

5.To recommence scan tuning, press and hold down either the Tuning up or Tuning down buttons for more the 0.5 sec.

6.When the waveband end is reached the radio will bleep and continue tuning from the opposite waveband end.

7.Rotate the Volume control clockwise to increase the volume and anticlockwise to decrease the volume. Set the Bass and Treble controls to the desired settings.

8.To turn off the radio press the Power button.

If you need any further advice, please call our Technical Helpline on :-

P owe r

B a n d

Tim e

S e t

Tuning

Manual/Auto Seek

Tuning

Manual/Auto Seek

 

 

 

 

 

 

FM

MHz

 

 

 

 

 

R 983

L i g h t

B a n d

Tuning

Dis p la y

TrebleBass

FM /M W /LW PLL D igital R adio with S ynthes ized Tuning

FM

MHz

 

 

 

FM

MHz

 

0181 758 0338 (Mon-Fri)

8

 

Page 9
Image 9
Roberts Radio R983 manual Operating the radio, Scan tuning