Operation via an AC adaptor (not supplied)
The AC adaptor for use with the R9958 should provide 3 volts DC output at 300 mA centre pin positive.
1.Insert the adaptor plug into the DC in socket on the left hand side of your radio.
2.Plug the adaptor into a standard 13A mains socket outlet. Whenever the adaptor is used the batteries are automatically disconnected.
The AC adaptor should be disconnected from the mains supply and the radio when not in use. The unit is only fully isolated from the mains if the AC adaptor is removed from the wall socket.
•IMPORTANT: The mains adaptor is used as the means of connecting the radio to the mains supply. The mains socket used for the radio must remain accessible during normal use. In order to disconnect the radio from the mains completely, the mains adaptor should be removed from the mains socket outlet completely.
•IMPORTANT: The R9958 should not be used with the mains adaptor in a bathroom, shower or poolside environment. Use on batteries only.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 | 6 |
|
