Roberts Radio R9994 Battery, Aerials, Loudspeaker on/off switch and earphones

Models: R9994

1 12
Download 12 pages 23.06 Kb
Page 4
Image 4

Battery

To insert the batteries fi rst open the battery cover (12) by sliding it in the direction shown by the arrow. Insert two LR03 ( AAA) size batteries into the compartment. Ensure that batteries are inserted in accordance with the diagrams shown inside the battery compartment.

Reduced power, distortion and a ‘stuttering’ sound are all signs that the batteries may need replacing.

If the radio is not to be used for an extended period of time it is recommended that the batteries are removed from the radio.

Aerials

The earphones act as an FM aerial when plugged into the earphone socket. The earphone lead should be fully uncoiled for best reception. There is a separate directional aerial built into the radio for MW and LW reception. To achieve the best MW/LW reception, it may be necessary to rotate the radio.

Loudspeaker on/off switch and earphones

Your radio may be operated using the built in loudspeaker or the earphones supplied.

1.The built in loudspeaker may be switched on by sliding the speaker/on/off switch to the speaker position.

2.When switched to FM and using the loudspeaker the enclosed pig tail aerial should be inserted into the earphone jack.

3.To operate your radio via earphones, plug the earphones into the earphone jack slide the speaker/on/off switch to the “On” position.

3

Page 4
Image 4
Roberts Radio R9994 operating instructions Battery, Aerials, Loudspeaker on/off switch and earphones