Roberts Radio RD-3 manual Operating you radio - DAB

Operating you radio - DAB

1.Fully extend the telescopic aerial

2.Press the On/Off button to switch on your radio. The display will show "Roberts DAB digital radio" for a few seconds.

3.If this is the first time the radio is used a full scan of all band III DAB channels will be carried out. The display will show "Autotune Full scan". If the radio has been used before the last used station will be selected.

4.During Autotune as each group of stations is detected the bottom line of the display will show its name and the station count will be updated. The top line of the display shows a bargraph indicating progress of the Autotune.

5.When the Auto tune is complete the first station (in numeric-alpha order 0...9...A....Z) will be selected.

6.If the station list is still empty after the Autotune you radio will display "No Signal".

If you need any further advice, please call our Technical Helpline on :- 020 8758 0338 (Mon-Fri)

2

4

rd-3 instruction book.pmd 5 7/9/2003, 11:06 AM