Software version
The software display cannot be altered and is just for your reference.
1. Ensure the DAB waveband is selected. To view the software version | 1 |
on the display press and hold in the Info button the display will show |
“Software.”
2. After a few seconds the display will revert to normal tuning mode.
Presetting stations
There are 5 memory presets for each of the two wavebands.
1.Press the On/Off button to switch on your radio.
2.Tune to the required station as previously described.
3.Press and hold the required Preset button until the display shows e.g. Preset 1 saved. The station will be stored under the chosen preset button. Repeat this procedure for the remaining presets.
4.Stations stored in the memories may be overwritten by following the above procedure.
13
15