Operating your radio - DAB
1. Carefully extend the telescopic aerial. | 2 |
2. Press the On/Off button to switch on your radio. The On/Off indicator will light and the display will show "Roberts" for a few seconds.
3. If this is the first time the radio is used a quick scan of UK Band III DAB channels will be carried out. The display will show "Autotune Quick scan". If the radio has been used before the last used station will be selected.
4. During Autotune as new stations are detected the station counter on the right hand side of the display will increase and stations will be added to the list.
5. When the Autotune is completed the first station (in
6. If the station list is still empty after the Autotune your radio will display "No Signal".
7. If no signals are found it may be necessary to relocate your radio to a position giving better reception.
If you need any further advice, please call our Technical Helpline on :-
020 8758 0338 | 6 |
|