![](/images/new-backgrounds/1036444/3644425x1.webp)
Operating your radio - FM
1.Fully extend the telescopic aerial.
2.Press the On/Off button to switch on your radio. The display will show "Roberts DAB digital radio" for a few seconds.
3.Press the Band button to select the FM band.
4.Press and immediately release the Auto Tune button, your radio will scan in an upwards direction (low frequency to high frequency) and stop automatically when it finds a station of sufficient strength.
5.After a few seconds the display will update and show station name.
6.To find other stations press and release the AutoTune button as before.
7.To scan the FM band in a downwards direction (high frequency to low frequency) press and hold down the AutoTune button for 0.5 seconds and then release.
8.When the waveband end is reached your radio will recommence tuning from the opposite waveband end.
9.Adjust the Volume, Tone and Deep bass boost switch to the required settings.
10.To switch off your radio press the On/Off button.
If you need any further advice, please call our Technical Helpline on :-
12
3
9 | 9 | 9 |
10
020 8758 0338 | 12 |
|