Controls

(Left side)

19

20

19.Handle

20.Mains power socket

Aerial assembly

1.Before using your radio, screw the telescopic aerial on to the protruding aerial stud by rotating the body of the aerial in a clockwise direction (as viewed from above). Only rotate the aerial by hand. Do not use pliers or any other tools as this may damage the aerial.

2.When it is fully screwed in place, pull the body of the aerial upwards slightly to lift the aerial stud and reveal its hinge. Then lay the aerial fl at and rotate it further to tighten it fully. The hinge will also allow the aerial to be positioned at an angle or collapsed and laid fl at when not in use.

3.For best radio reception the aerial should be restored to a vertical orientation and fully extended.

4.The aerial may be removed for storage if necessary by collapsing the aerial and then rotating the aerial body in an anti-clockwise direction (as viewed from above).

If you need any further advice, please call our Technical Helpline on :-

(Right side)

21

22

21.DAB / FM switch

22.Battery compartment

020 8758 0338 (Mon-Fri)

4