Operating your radio - DAB
1.Carefully extend the telescopic aerial (see page 4).
2.Slide the DAB/FM switch to the 'DAB' position. Switch on the unit by rotating the Function switch to the Radio position. The 'On' indicator will light.
3.Thedisplay will show 'Welcome'for afew seconds and the DABsymbol will appear in the display.
4.If this is the fi rst time the radio is used a full scan of the UK band III DAB channels will be carried out. If the radio has been used before the last used station will be selected.
5.The autotune takes around 30 seconds. The display will continue to show 'Welcome'. The lower line will show the progress of the scan.
6.When theAutotune is complete the fi rst station (in
7.If the station list is still empty after the Autotune you radio will display "No Serv ready".
8.If no signals are found it may be necessary to relocate your ZoomBox to a position giving better reception.
Note: that radio station name and frequency displays shown in this user guide may differ from those that you see on your radio. Broadcasters may change radio station names that are transmitted, and the frequencies used for DAB and FM radio stations may not be the same in all parts of the country.
If you need any further advice, please call our Technical Helpline on :-
2
2
020 8758 0338
6