8
2Connect the selected tip to the end of the output cable,
making sure that the pins on the tip are aligned with the
holes in the cable. The ridge on the inside of the tip
should align with the groove in the output cable
connector. Also make sure that the tip is pushed all the
way into the output cable's connect or.
3Plug the power tip into your notebook computer.
4Plug the DC power connector input cable into the power
adapter.
5Remove the vehicle cigarette lighter co nnector to reveal
the air connector, by holding the tab at the base of the
connector to slide the cigarette lighter connector off.
6Insert the adapter's air connector into the in-seat power
socket, which is usually found on the arm of your seat or
under the seat. The adapter's status light will glow when
powered. When the adapter has power, the status light
turns on. Your device is now powered.
FAQ for Rocketfish adapters

What tip should I use for my laptop?

You can determine the correct tip for your laptop by
referencing the Tip Compatibility Guide included wi th the
adapter or by visiting the Tip Wizard at
www.RocketfishProducts.com. Locate your laptop
manufacturer and model and the correct tip will be listed.
Hold this tab and
slide the auto
connector off.
Auto connector Air connector
RF-BPRACDC2 09-0392_ENG.fm Page 8 Tuesday, May 19, 2009 3:24 PM