For highest performance and reliability, install the latest updates and service pack (SP). For Windows, go to the Start menu and select Windows Update.
Physical description
Front
Setting up your hard drive enclosure
Installing your hard drive in the enclosure
Read the safety precautions before you install your hard drive in the enclosure:
•Use only the accessories provided.•Make sure that you first touch an unpainted, grounded metal object to discharge any static electricity stored on your clothing or body before touching any electronic components.
•Handle the printed circuit board (PCB) edges only. Avoid touching the onboard electronic components.
To install your hard drive in the enclosure:
1Slide the lock switch to the left to open the enclosure.Lock switch to open the case
Back
|
|
|
|
|
|
|
|
USB 3.0 Micro | Backup button with | ||
|
| power/activity LED |
Status indicators
The following table describes theOperating mode | LED status | Description |
Starting mode | Solid | The hard drive is turned on. |
|
|
|
Active mode | Flashing | Data is being transmitted between your computer |
| and the hard drive. | |
|
| |
Disconnect mode Off | The hard drive is turned off. | |
|
|
|
2Remove the four screws from the printed circuit board, then remove the printed circuit board.
4