Introduction

Congratulations on the purchase of your new Rocketfish RF-HD3035 external hard drive enclosure kit.

The USB 3.0 Rocketfish 3.5" SATA hard drive enclosure lets you install a high-speed SATA hard drive and connect it to a computer via a USB 3.0 port. The enclosure has a built-in USB 2.0 hub and a memory card reader.

SuperSpeed USB 3.0 transfers data at 5 gigabits per second. That's up to 10 times faster than USB 2.0.

The performance may vary, based on your system configuration.

Safety information

Warning: To reduce the risk of fire or electric shock, do not expose this device to rain or moisture.

CAUTION
RISK OF ELECTRIC SHOCK
DO NOT OPEN

This symbol indicates that dangerous voltage constituting a risk of electric shock is present within your hard drive enclosure.

This symbol indicates that there are important operating and maintenance instructions in the literature accompanying your hard drive enclosure.

Important safety instructions

•This device is to be used in temperatures of 41~95°F (5~35°C). Temperatures exceeding these limits may damage your hard drive or the enclosure. Avoid heat sources or direct sunlight.

•This device can be stored in a humidity range of between 10% and 90%, and can be operated in a humidity range of between 5% and 80%.

•Do not connect the device to your computer without taking precautions to avoid electrostatic discharge or short circuits, which could damage the device or your computer.

•Do not place this device close to a source of strong magnetic fields (such as a computer screen, TV, radio, or speaker). Strong magnetic fields can affect the reliability of data transfer to and from the device.

•Do not place anything heavy on top of the device.

•Use only the accessories provided in the accessory package.

•Before you install or use the device, read the user manual and assemble the enclosure carefully.

•To prevent short circuits, do not leave any metal objects inside the enclosure when installing the hard drive.

•To prevent short circuits, do not use the device close to water, rain, or high humidity.

Features

•Multi-function storage solution for your computer.

•Supports up to 2 TB 3.5" SATA interface hard drive.

•Provides a two-slot USB 3.0 card reader that supports SDXC, SDHC, SD, MMC, MS, MS PRO, xD, Compact Flash (UDMA, Type I / II), and IBM Microdrive.

•Provides two external USB 3.0 downstream ports.

•Can stand up or lie down while operating.

•One-button backup to easily backup, restore, and synchronize data between your Windows PC and the enclosure.

•Has one power-on LED, with backup active indicator.

•Metal design facilitates rapid heat dissipation.

•Supports Plug-and-Play and is hot-swappable.

Package contents

•USB 3.0 3.5" SATA hard drive enclosure

•USB 3.0 A-B cable

•AC power adapter

•Utility CD (User Guide and software)

•Quick setup guide

•Stand

•Accessories

•Plastic brackets (2)

•Screws and screwdriver

•Rubber pads (4)

System requirements

•One formatted 3.5" SATA hard drive.

•PC or Macintosh computer with an available USB 3.0 port. (You can connect to a USB 2.0 port, but it will only run at USB 2.0 speeds).

RF-HD3035 3