10-outlet Power Manager with
Surge Protection and Noise Filtering
RF-HTS115
QUICK SETUP GUIDE
Congratulations on your purchase of this Rocketfish Power Manager with surge protection and noise filtering.
Your power manager:•Reduces energy consumption to save environmental resources and lower your electric bill
•Provides surge protection for sensitive electronic devices•Incorporates noise filtering to provide“clean”power that will maximize the performance of your equipment
Features
*Two AC adapter spaced outlets on the far left end and 2 outlets on the far right end
1One master outlet - controls power to the five2Data line surge protection – protects your incoming RJ11 (phone) or RJ45 (Ethernet) line from surges and spikes.
3Power LED indicator - Lights to indicate that the power manager is receiving adequate power from the AC outlet.
4Protected LED indicator - Lights when the surge protection feature is working properly. If this LED does not light or goes out, the surge protection feature has reached full capacity and can no longer absorb additional surges and spikes. The power manager should be replaced if this light goes out.
5Grounded LED indicator – Lights when a properly grounded AC outlet is detected. If this LED does not light, we recommend that you contact a certified, licensed electrician to inspect your wiring.
67 ft (2.1 m)
7Main power switch/circuit breaker – controls power to all AC outlets on the Power Manager, and allows the unit to be reset in the event of a circuit overload (after the overload condition has been resolved).
8Coaxial cable surge protection – protects your incoming coaxial cable line from surges and spikes.
9Four AC adapter spaced outlets – accommodate bulky AC adapter plugs.