10Five
11Four
•3,450 joules surge protection – Protects your equipment from damaging power surges and spikes.
•70 dB EMI/RFI noise filtering – Ensures that your equipment receives only clean power for maximum performance.
•Audible alarm – Sounds when the surge protection feature has reached full capacity and can no longer absorb surges and spikes. The power manager should be replaced if this alarm sounds.
•Power cord labels – attach these labels to your power cords (near the plug end) to help identify which cord is attached to which device in the event that one should need to be unplugged for any reason. The labels are
Operating instructions
1Plug the power cord of the Rocketfish Power Manager into a standard 120V AC outlet. If the LEDs do not light up, press the main power switch/circuit breaker on the side of the unit.
2Plug the power cord of your primary home theater device, such as a TV, into the Master outlet of the Power Manager. When this device is powered off or goes into a SLEEP or STANDBY mode, power to the devices plugged into the
3Plug the power cords of your secondary devices, such as a
Note: Do not plug any device into a
4Plug the power cords of any devices that require constant power, such as a DVR/PVR, or devices that you wish to use while the primary device is powered off, into the
5Connect the incoming coaxial cable source (i.e., the cable jack on the wall or incoming satellite line) to the coaxial jack marked IN on the Power Manager.
6Connect a separate coaxial cable from the coaxial jack marked OUT on the Power Manager to the coaxial input jack of the cable/satellite
7Connect the incoming phone (RJ11) or Ethernet (RJ45) line to the data line jack marked IN on the Power Manager.
8Connect a separate phone or Ethernet cable from the data line jack marked OUT on the Power Manager to the corresponding input jack (phone or Ethernet) on the device (i.e., satellite
Note: the data line jacks are combo (RJ11/RJ45) jacks, meaning they will accept either a RJ11 or RJ45 plug. They will not accept both types of plugs simultaneously.
9After all devices have been properly plugged into the Power Manager and powered on, when you power the primary device that is plugged into the Master outlet on and off, the secondary
devices that are plugged into the
Specifications
•Load rating: 15 amps
•Line voltage: 125V AC @ 60 Hz
•Surge protection: 3 lines (L-N / L-G / N-G)
•Maximum surge current: 180,000 amps
•Maximum energy dissipation: 3,450 joules
•Clamping voltage: L-N / L-G / N-G = 400 volts
•EMI/RFI noise filtering: Up to 70 dB
•Standby power consumption: 0.99 watts
•UL-1449 certified
Safety precautions
•RISK OF ELECTRIC SHOCK–Use only in dry locations and only indoors.
•DO NOT plug into another relocatable power tap.
•DO NOT“daisy chain”surge protectors.
•DO NOT use with any aquarium equipment.
•DO NOT use if correctly grounded outlets are not available.
•DO NOT install this device if there is not at least 30 feet
(10 meters) or more of wire between the electrical outlet and electrical service panel.
Connected equipment limited lifetime warranty: up to $300,000 equipment coverage
One-year limited product warranty
See included warranty sheet, visit www.rocketfishproducts.com or call
© 2011 BBY Solutions, Inc., All Rights Reserved. Distributed by Best Buy Purchasing, LLC
7601 Penn Avenue South, Richfield, MN USA 55423-3645
ROCKETFISH is a trademark of BBY Solutions, Inc. All other products and brand names are trademarks of their respective owners.