Maintaining
Fully charge the battery at least once every three months to prevent battery damage.
Troubleshooting
| Problem | Cause | Solution | |
|
|
| |
No output voltage | Cords are not connected securely. | Make sure that all cords are connected | |
|
| securely. | |
|
|
| |
| The power soure is in a protective | Disconnect the AC or cigarette power | |
| state. | adapter cord, let the power source cool | |
|
| (if necessary), then reconnect the cord. | |
|
|
| |
| The internal battery is completely | Charge the battery for five hours. | |
| discharged. |
| |
|
|
| |
Power supply does not | The connected device has a greater | Use a device with a lower power | |
run the connected | power rating than the power source. | rating. | |
device. |
|
| |
Starting power of the device is up to | Use a device that uses a lower starting | ||
| |||
| two times that of its rated power. | power. | |
|
|
|