Specifications

StandardsWirelessHD, HDMI
Frequency60 GHz

Input/Output interface

HDMI interface
AntennaType36 antenna array (integrate ceramic)
Range33 feet (10 meters) indoors
AV Port

1 HDMI port (for both the transmitter and receiver)

Physical Specifications

Stand weight: 1.29 oz. ±0.18 oz. (36.7 g ±5 g)

 

Device weight: 13.06 oz. ±0.35 oz. (369 g ±10 g)

Dimension: (L) x (H) x L R (W)

7.48 × 1.65×2.99×3.66inches(190×42×76×93mm)

Adapter Power

AC 90-230V @ 60Hz input, DC 12V 1.5A

LED Indicators

Transmitter: Four LEDs (power, pairing indicator, weak signal

 

strength indicator, and strong signal strength indicator)

 

Receiver: Four LEDs (power, pairing indicator, weak signal

 

strength indicator, and strong signal strength indicator)

Operating Environment

OperatingTemperature: 32° ~ 104°F (0° ~ 40°C) ambient

 

temperature.

 

StorageTemperature: -22° ~ 158°F (-30° ~ 70°C)

Humidity

Operating: 10% to 90% (Non-condensing)

 

Storage: 5% to 90% (Non-condensing)

 

 

 

 

TV format480I/480P/576I/576P/720P/1080i/1080P
PC resolution

Resolutions supported at 60 Hz refresh rate:

 

640 × 480, 800 × 600, 1024 × 768, and 1280 × 1024

Refresh rate compatibility

23.94 Hz/24 Hz/50 Hz/59.94 Hz/60 Hz

 

 

Audio resolution32-192 KHz

Legal notices

FCC

Interference Statement

This device complies with Part 15 of the FCC Rules. Operation is subject to the following two conditions: (1) this device may not cause harmful interference, and (2) this device must accept any interference received, including interference that may cause undesired operation.

NOTE: This equipment has been tested and found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC Rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses, and can radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications.

In order to comply with FCC RF Exposure requirements, a separation distance of at least 20 cm must be maintained between the antenna and all persons.

However, there is no guarantee that interference will not occur in a particular installation. If this equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures:

Reorient or relocate the receiving antenna.Increase the separation between the equipment and receiver.

Connect the equipment into an outlet on a circuit different from that to which the receiver is needed.

Consult the dealer or an experienced radio/TV technician for help.

ICES-003 and RSS-210

This Class B digital apparatus complies with Canadian ICES-003 and RSS-210. Operation is subject to the following two conditions: (1) this device may not cause interference, and (2) this device must accept any interference, including interference that may cause undesired operation of the device.

One-year limited warranty

Visit www.rocketfishproducts.com for details.

© 2009 Best Buy Enterprise Services, Inc. Distributed by Best Buy Purchasing, LLC 7601 Penn Avenue South, Richfield, MN USA 55423-3645

ENGLISH 09-0902