Rockford Fosgate 2X, 5X, 3X U S I N G T H E D U A L F I L T E R, Installing The Procards

Punch 5X

Front Output

Front Dual

Filtered Output

Dual Filtered Non-Faded Output

Rear Dual

Filtered Output

Rear Output

6.5kHz

100HzBlank

100HzBlank

100HzBlank

6.5kHz

U S I N G T H E D U A L F I L T E R

The Punch 3X and the Punch 5X both have Dual Filter sections. The Dual Filter is a two stage cascaded filter which uses two PROCards. The first card determines the initial action and the second, the subsequent action. The most common usage would be to use a low- pass module in the first position followed by a high-pass module in the second to build a bandpass function. By using two cards of the same action at the same frequency, the filter slope is increased to 24dB per octave. Both sockets must be used for a simple 12dB per octave filter. Install the card in the second position for full range operation.

INSTALLING THE PROCARDS

The operation of each filter section is determined by the use of plug in cards. These multifunctional cards are available for a multitude of operational frequencies, and their orientation in the socket deter- mines their function. Each socket has a blank plastic side which positions the card against the spring loaded contacts. The front, or active, face of the card is marked with arrows to indicate which edge plugs into the socket. Orient the card with the chosen face toward the contacts and plug it into the socket of the appropriate filter operation. The rear face of the card is for full range operation and either edge can be used.

– 8 –