INTRODUCTION
This manual contains information on the construction, installation and operation of the Punch FRC (Full Range Coaxial) Speakers. We recommend you keep this manual for future reference.
The Punch Full Range Speakers are
PACKAGE CONTENTS
1 Pair of Full Range Speakers
1 Pair Grilles (FRC2204, FRC2205, FRC2206, FRC2206F, FRC2269, FRC2369 only)
20' of 18 gauge Speaker Wire Mounting Hardware Installation & Operation Manual
INSTALLATION
I
+ - NS
T
A
L
L
A
T
I
O
N
Since some of these Punch Full Range Speakers are most often used as direct replacements for stock speakers and are shipped without grilles, some of the following instructions will not apply. For custom installations see your Authorized Rockford Fosgate Dealer.
1.Determine where the speakers will be mounted. Ensure an area large enough for the speaker to mount evenly. Be sure that the mounting location is deep enough for the speaker to fit; if mounting in a door, operate all functions (windows, locks, etc.) through their entire oper- ating range to ensure there is no obstruction.
2.Refer to the specification chart to determine the proper diameter hole to cut for your speaker model.
3.Using the plastic mounting ring as a template, mark the locations for the mounting screws. Drill the holes with a 1/8" bit.
4.Feed the speaker wires through the cutout and the plastic mounting ring (from the flat side) and connect to the speaker terminals. Be sure to observe proper polarity when connecting the wires. The speaker's positive terminal is indicated with a "+".
5.Fit the ring and speaker to the cutout. Mount them using the enclosed screws. Fit the grille inside the ring and press gently, but firmly, into place.
– 1 –
