Rockford Fosgate IB-200 manual Contents

Contents
Tools needed for installation	2
IBeam Specifications	2
Recommended Amplifier Specifications	2
Introduction and Precautions	3
Vehicle Installation	4
Home Theater Installation	5-6
Troubleshooting	7
Warranty	7

Tools needed for installation.

Drill

Drill bit for pilot holes. 1/8” (3mm)

#2 Phillips head bit with extension OR #2 Phillips head screwdriver. Wire cutters

Wire strippers (16/14 or 12AWG)

You will also need an adequate length of 16/14 or 12 AWG (American Wire Gauge) speaker wire for connection to your IBeam tactile transducer.

IBeam Tactile Transducer Specifications

		Model Number:	IB-200
		Size (H x W x D):	2.0” x 4.25” x 6.875”
2.00"		Weight:	2.5 lbs (1.13 Kg)
(5.08cm)		Force / Watt: 2.5 lbs/Watt (11.1 Newtons/Watt)
		Continuous Power Handling:	100 Watts
6.875"		Peek Power Handling:	250 Watts
		Overload Protection:	PPTC self reset fuse
(17.46cm)	4.25"
		Impedance:	4-ohms
	(10.79cm)
		Frequency Response:	20Hz – 800Hz

Recommended Amplifier Specifications

Minimum: Amplifiers producing 100 Watts @ 4-ohms is the minimum recommendation.

Optimum: Amplifiers producing 150 – 250 Watts @ 4-ohms offer the best experience.