Protection
Battery Fusing Rates (External to Amplifier) Fuse Type
Equalization (Punch Bass) Input Impedance
SPECIFICATIONS
MODEL
Dynamic Power Rating - Measured at 14.4 Volts Mono into a 4Ω Load
Mono into a 2Ω Load
Dimensions: (with Endbell) Height Width Length
Frequency Response Bandwidth
Damping Factor @ 4Ω (at output connector ) Slew Rate
IM Distortion (IHF)
Source Unit Compatibility (+15dB gain overlap) Acceptable Signal Voltage Range
PUNCH 200M
100 Watts
200 Watts
>100dB
12dB/octave Butterworth
variable from 50Hz to 210Hz
variable AP/LP
2.60" (6.60cm) 9.8" (24.89cm) 11.35 (28.83cm)
20Hz to 20kHz ±0.5dB
10Hz to 100kHz ±3dB
>200
30 Volts/ms
<0.05%
17V max. (low level in)
Variable from 250mV to 4V (RCA Input)
Variable from 0.5V to 11V (High Level Input)
NOMAD - Internal
15 amps
ATC
Switchable from 0dB to +6dB to +12dB
20k ohms
Specifications subject to change without notice
10