Rockford Fosgate X1, X2 Accessories, Specifications, Connecting Punch Capacitors, Color Options

ACCESSORIES

Connecting PUNCH Capacitors

Maintain the power you need to your Type RF Amplifier.

Color Options

Personalize your Type RF amplifier by changing the top and corner plastics to different colors. Available through our web site or local retailer.

See our website for other accessories to help you get the most out of your system.

www.rockfordfosgate.com – password TYPERFUSA to access the Type RF page.

SPECIFICATIONS

MODEL- Type RF 2-Channel X1 X2 X3

Continuous Power Rating (RMS) - Measured at 12.6 Battery Volts

4Ω Load Per Channel	25 Watts x 2
2Ω Load Per Channel	50 Watts x 2
4Ω Load Bridged (mono)	100 Watts x 1
Dimensions:
Height	3.175" (8.07cm)
Width	11.6" (29.46cm)
Length	15.09" (38.33cm)
Battery Fuse Rating (Amp)	30A
(External to Amplifier)	Not Supplied
Fuse Type	AGU

50 Watts x 2

100 Watts x 2

200 Watts x 1

3.175" (8.07cm) 11.6" (29.46cm) 17.59" (44.68cm)

50A

Not Supplied

AGU

75 Watts x 2

150 Watts x 2

300 Watts x 1

3.175" (8.07cm) 11.6" (29.46cm) 20.09" (51.03cm)

80A

Not Supplied

AGU

Signal-to-Noise Ratio	>93dB A-weighted
Crossover Slope	48dB/octave
Crossover Frequency	All Pass/Low Pass/High Pass/Direct
Crossover Frequency	variable from 50Hz to 350Hz
Frequency Response	20Hz to 20kHz ±0.5dB
Bandwidth	20Hz to 22kHz ±3dB
Damping Factor @ 4Ω (at output connector )	>200
Slew Rate	30 Volts/ms
IM Distortion (IHF)	<0.05%
Acceptable Signal Voltage Range	Variable from 100mV to 6.5V (RCA Input)
Protection	NOMAD - Internal analog-computer output protection
	circuitry limits power in case of overload. Thermal
	switch shuts down the amplifier in case of overheating.
Input Impedance	20k ohms

Specifications subject to change without notice

12