![MAINTENANCE](/images/new-backgrounds/27409/2740913x1.webp)
5)Leaving the System Running - Unlike many solid state amplifiers, the
MAINTENANCE
The Rogue Sixty Six has been designed to provide many years of enjoyable and reliable service. The greatest care has been taken to select vacuum tubes that provide superior sound and ensure long life. In addition, this unit utilizes a slow turn on feature which helps prevent cathode stripping during power up. This feature will greatly increase usable tube life.
Replace Tubes by :
1)Removing the top cover by unscrewing 10 screws.
2)Using a glove or cloth, carefully remove the tubes from their sockets.
WARNING : If unit has been powered up, you must turn off the switch and wait at least one hour before disconnecting the electrical cord. After doing so, the unit may be unplugged and the top cover removed. This time is required for dangerous voltages to dissipate to ground.
3)Obtain and insert a new set of tubes. It is recommended that a new set of tubes be obtained from Rogue. If tubes are obtained from another source, follow the diagram in figure 2 or 3 for tube type.
4)Insert new tubes in sockets using a glove or cloth. See figure 2 or 3 for locations.
Rogue Sixty Six Owners Manual | 5 |