Rogue Audio Tempest Vacuum Tube Integrated Amplifier Adding a Rogue EIGHTY-EIGHT Power AMP

ADDING A ROGUE EIGHTY-EIGHT POWER AMP

One of the features of the Tempest is that a Rogue Eighty-Eight power amplifier can be added at a later date to increase the system power. It is important to use a Rogue Eighty-Eight amplifier so that the power levels are equivalent between the two amplifiers for a given input signal. It is also required that the speakers are capable of being biamped (Separate inputs for tweeters and woofers) The procedure for biamping is as follows:

1)Remove the shorting connection on the speakers between the tweeter and woofer inputs.

2)Attach the Speaker wires from the Tempest to the tweeter connectors on the loudspeakers.

3)Attach speaker cables from the Eighty-Eight amp to the woofer connectors on the loudspeakers.

4)Connect the active outputs of the Tempest to the inputs of the Eighty-Eight amp.

OWNER AND WARRANTY REGISTRATION FORM

Included with this manual is an Owner and Warranty Registration Form. Please take a minute to fill out this card and return it Rogue Audio.

Rogue Tempest Owners Manual 11