Rogue Audio Vacuum Tube Preamplifier Introduction, Unpacking The Perseus Power Preamplifier

INTRODUCTION

Congratulations on your purchase decision! We at Rogue Audio truly believe that our preamplifiers provide the “smartest” value in high-end audio. If you have never owned a vacuum tube preamplifier you will be thrilled by the silky-smooth sound and incredible detail that only a tube preamplifier can provide. And with the Perseus preamplifier, you can be sure that you are getting the very best in tube amplification. We at Rogue Audio are extremely proud of our products and want you to enjoy them to their fullest potential. So please, take the time to read through this short manual so that you can be confident that you have set up your preamplifier properly.

UNPACKING THE PERSEUS POWER PREAMPLIFIER

Tools required: none

WARNING - This preamplifier uses voltages that could cause injury or death. Never open the preamplifier while it is plugged in, and always wait at least one hour after turning the unit off to unplug and open the unit. Lethal voltages can remain in the electronics after the unit is unplugged.

The Perseus preamplifier has been painstakingly inspected for cosmetic flaws during and after assembly. In order not to damage the cosmetic appearance of your preamplifier it is important that you follow the unpacking instructions carefully.

1.Remove the small corrugated tube containing the power cord, and remote.

2.Carefully lift the preamplifier out of the box, and remove the foam pads and plastic bag.

3.The Perseus can be used either with or without the tube cage. To remove the tube cage, first unscrew 10 cover screws. Lift the cover off, and remove the 4 nuts holding the tube cage in place. Replace the cover prior to use.

4.Save the packing materials. The packing materials and box have been carefully designed to protect your valuable equipment during shipping so you don’t want to throw them away.

3