Roku M1000, M2000, M500

WI-FI SETUP AND PASSWORD HELP

Background

Why Wi-Fi?

With SoundBridge’s wireless functionality, you can stream music from compute rs on your

wireless network to one or more Wi-Fi enabled SoundBr idge devices via your wireless access

point (WAP). You can even connect up to ﬁve SoundBridges to one iTunes music library, or up

to ten SoundBridges to one Windows Media Connect library, and listen to dif ferent tunes in

every room of your house.

Wi-Fi Hardware

For a list of compatible Wi-Fi access points that Roku has tested with SoundBrid ge, please visit

www.rokulabs.com/support.

Wi-Fi Setup Instructions

1. Verify that your wireless network is up and running on yo ur computer. If you are setting

up this wireless network for the ﬁrst time, please make sure that you have followed your

wireless vendor’s instruction manual for proper conﬁguration of your wire less access point.

2. SoundBridge M1000 users, skip to step 3. M2000 and M500 users , follow these steps:

- Remove both the left and right end caps of SoundBridge by pressing on the t wo release

tabs labeled “push.” If your SoundBridge is currently powered on, press Standby on you r

remote and then disconnect SoundBridge from power by unplugging th e AC power

cord.

- Remove the CompactFlash wireless card from its packaging and inser t the card into the

CF slot on the left side of SoundBridge. Make sure that the “Roku” lab el and two small

status lights are facing away from you as you gently push the card into place. (Note : The

LED lights will not be illuminated until you power on SoundBridge.) Be c areful, forcing

the card into position may damage your device.

- If you had been previously using a wired Ethernet connection, disconn ect the cord