47

Section 1. Recording and playing back

Section 1

8.

Play back the song, and use the INPUT
LEVEL dial to adjust the volume of the
input source.

Listen and compare the input source with
the track to be re-recorded, and adjust the
INPUT LEVEL dial so that there is no
difference in volume.

9.

Move to a location slightly earlier than the
point at which you want to begin re-
recording.

10.

Press to enter the recording
standby condition, and then press
.

Recording will begin automatically at the
point you specified as the punch-in location.
When you reach the punch-out point, you
will automatically return to playback.

11.

When you’ve finished recording, press
to stop.

12.

Return to a time location where you
began recording, and then play back.

Listen to the re-recorded result.
The Repeat function (p. 43) lets you repeatedly
play back a specified region (the loop region).
If you use the Repeat function in conjunction
with auto punch-in/out, the recorded result will
be played back immediately.
If you’re not happy with your recording, you can
continue re-recording simply by pressing .
“Loop recording” refers to the method of using
the Repeat function in conjunction with auto
punch-in/out to record repeatedly.
In the following example, we’ll re-record a
portion of track 1 which you recorded earlier.
For details on how to specify the region to be re-
recorded (the punch-in/out points), refer to the
preceding section “Auto punch-in/out.”
1.
Specify the punch-in and punch-out
points as described in steps 1–2 of
“Playing back repeatedly (Repeat) (p.
43)”.
2.
Press [TR3] (R&A).
The region you specified will be the auto
punch-in/out region. In the display, ,
and “A.PUNCH” will be lit.
One measure before and after the punch-in/
out region will be automatically specified as
the repeat region.

fig.01-240

3.

Press one of the [TR1]–[TR4] buttons.

4.

Press CURSOR [ ][ ] several times
to access the Rec Track screen.

Repeatedly recording the

same region (Loop

Recording)

PlaybackPlayback
Repeat
Repeat start point
(A)
Punch-In Punch-Out
Repeat end point
(B)
Time
Recording
1 meas. 1 meas.
MICRO-BR_e1.book 47 ページ ２００６年８月１日　火曜日　午後１２時６分