39
Additional Convenient Functionality <Advanced Operation>
You can make adjustments on the C-230 to regulate the volume being input from your external audio device to the INPUT jacks.
The volume may change abruptly when you adjust the
volume of the input from an external device, so you
should turn the C-230's [Volume] knob counterclockwise
to lower the volume before you make this adjustment.
While holding down the [Function] button, turn the
[Volume] knob.
When you turn the [Reverb] knob of the operating panel
(see p. 16), the reverb effect will be applied to the C-230’s
sound as well as to the sound being input via the INPUT
jacks.
However, you can also adjust the amount of reverb that
is applied to the input sound separately.
While holding down the [Function] button, turn the
[Reverb] knob.

Adjusting the input volume

+

Adjusting the amount of reverb for the input signal

+
C-230_e.book Page 39 Tuesday, May 19, 2009 10:22 AM