Roland CM-30 owner manual Making the Connections, Control Panel

Making the Connections

Refer to the figure shown below to connect the CM-30 and the other equipment.

Control Panel

Keyboard

Recorder

OUTPUT

OUTPUT

Mic

Stereo Link (p. 10)

MD Player

Here is an example of a setup that makes full use of the CM-30’s mixer and monitor functions.

A mic is input to CH 1, which accepts mic level input. Connect a keyboard, recorder, or other sound-generating devices to the CH 2 and CH 3 inputs.

*To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and turn off the power on all devices before making any connections. Set all of the CM-30’s channel volume knobs as well as the MASTER knob to zero.

Stereo

Headphones

Jack Panel

CD Player

*Howling could be produced depending on the location of microphones relative to speakers. This can be remedied by:

1.Changing the orientation of the microphone.

2.Relocating microphone at a greater distance from speakers.

3.Lowering volume levels.

*When connection cables with resistors are used, the volume level of equipment connected to the inputs (CH 1 through CH 3, AUX IN 1 and 2) may be low.

If this happens, use connection cables that do not contain resistors, such as those from the Roland PCS series.

8