Gain Knob, Bass Knob, Middle Knob, Treble Knob

Panel Descriptions

*All product names mentioned in this document are trademarks or registered trademarks of their respective owners, and are not related to Roland Corporation.

In this manual, these names are used as appropriate ways to indicate sounds that are simulated using COSM technology.

6. GAIN Knob

Adjusts the LEAD channel’s distortion level.

7. VOLUME Knob

Adjusts the LEAD channel volume.

EQUALIZER

8. BASS Knob

Adjusts the tone of the lower range.

9. MIDDLE Knob

Adjusts the tone of the midrange.

10.TREBLE Knob

Adjusts the tone of the upper range.

*No sound will be produced when BASS, MIDDLE, and TREBLE knobs are all set to 0 while the Type switch is set to BLACK PANEL or TWEED.

PRESENCE

11. PRESENCE Knob

Gives the midrange and high end a more lustrous contour. Very effective when you want to give the sound a good feeling of airiness.

EFX (Effects)

12. EFX (Effects) Knob

Turn this knob to chorus, flanger, phaser, or tremolo to select the corresponding effect. Turn the knob to adjust the amount of effect applied.

The ON indicator lights up when EFX is turned on, and goes out when EFX is turned off. You can also turn EFX on and off using an optional foot switch (the BOSS FS-5U).

*Graduations for CHORUS, FLANGER, PHASER, TREMOLO on a panel are for reference. Be sure to check the sound as you adjust the effects.

fig.02

CHORUS

In this effect, a slightly detuned sound is added to the original sound, giving the sound greater breadth and fullness.

fig.03

FLANGER

This creates a flanging effect that creates a sort of spinning sensation with the sound.

fig.04

PHASER

This effect adds a variable phase- shifted signal to the direct sound, giving the sound a swirling character.

fig.05

TREMOLO

Tremolo is an effect that creates a cyclic change in volume.

DELAY/REVERB

13. DELAY/REVERB Knob

Turn this knob to DELAY or REVERB to switch to that effect. Turn the knob to adjust the amount of effect applied.

The ON indicator lights up when DELAY or REVERB is turned on, and goes out when DELAY or REVERB is turned off. You can also turn DELAY or REVERB on and off using an optional foot switch (the BOSS FS-5U).

*Graduations for DELAY, REVERB on a panel are for reference. Be sure to check the sound as you adjust the effects.

fig.05a

DELAY

Turn the knob to change the time and amount of delay effects.

fig.05b

REVERB

Turn the knob to adjust the reverb level.

14. RECORDING OUT/PHONES Jack

When Using RECORDING OUT

Connect to a recorder or other recording device.

Features COSM speaker modeling, allowing you to use the CUBE-60 as a high-performance amp simulator.

When Using Headphones

Connect headphones to this jack.

The COSM speaker modeling allows the guitar amp to produce sounds with real punch.

*No sound is output from the CUBE-60’s speaker or any external speaker when the RECORDING OUT/PHONES jack is in use.

15. POWER Switch

Turn the power on and off.

*This unit is equipped with a protection circuit. A brief interval (a few seconds) after power up is required before the unit will operate normally.

*Always make sure to have the volume level turned down before switching on power. Even with the volume all the way down, you may still hear some sound when the power is switched on, but this is normal, and does not indicate a malfunction.

16. Power Indicator

This indicator lights when the unit is turned on.

CUBE-60 specifications

The Roland CUBE-60 is a versatile and compact amplifier that has gained a reputation for delivering high-quality sound across a range of musical styles. Designed for guitarists and musicians seeking portability without compromising on tone, the CUBE-60 combines innovative technologies with user-friendly features.

One of the standout characteristics of the CUBE-60 is its powerful 60-watt output and 12-inch speaker, which deliver a rich and dynamic sound. This makes it suitable for small gigs, rehearsals, and even home practice. The amp's design allows it to project sound effectively, ensuring that the musician is heard clearly in any setting.

The CUBE-60 is equipped with a variety of COSM (Composite Object Sound Modeling) amplifiers that simulate various iconic amp tones. Musicians can choose from classic rock, blues, jazz, and more, allowing them to experiment with different sounds and styles. The amp features a user-friendly interface, with straightforward controls for gain, tone, and volume, making it easy for players of all levels to dial in their desired sound quickly.

Another notable feature of the CUBE-60 is its built-in effects. It includes various options such as reverb, delay, chorus, and more, providing musicians with the tools they need to enhance their performances. These effects can be combined and adjusted, offering a wide array of sonic possibilities to suit different musical genres.

Portability is a key advantage of the CUBE-60. Weighing in at just 19 pounds, it is light enough to carry to gigs or rehearsals, while its rugged construction provides durability for life on the road. Additionally, the amp has a headphone output, allowing for silent practice, which is perfect for late-night sessions or when you want to keep noise levels down.

In terms of connectivity, the CUBE-60 boasts an auxiliary input for jamming along with backing tracks and a direct output for easy recording. This versatility makes it an ideal choice for musicians who want an amp that can do it all.

Overall, the Roland CUBE-60 is a powerful, versatile, and portable amplifier that caters to the needs of modern musicians. With its advanced modeling technology, built-in effects, and user-friendly design, it provides an excellent platform for both practice and performance. Whether you are a novice or an experienced player, the CUBE-60 offers the sound quality and features to help elevate your music.

Roland CUBE-60 Gain Knob, Bass Knob, Middle Knob, Treble Knob, Presence Knob, DELAY/REVERB Knob

Models: CUBE-60