Roland E-09 owner manual Effects

16
Performance Functions and Effects
Example: To enter “12”
Press [1] -> [2] and wait a few moments until the number is
confirmed. Alternatively, press [0] -> [1] -> [2].
When you’re finished using the numeric keys, press
[NUMERIC] so it goes out.
If you’ve edited the music assistant settings (for example by
changing the tone of the main part), you can save the edited
settings in a user program.
The E-09 provides 100 user programs (00–99). You can use these to
store settings for most of the front panel operations and function
menus (p. 22).
MIDI settings (p. 26) are automatically stored in the E-09. They
are not saved in a user program.
Saving Your Settings in a User
Program
1. Hold down [USER PROGRAM] for a few moments.
The display will indicate “Write?”
2. Continue holding down [USER PROGRAM], and press
TONE category numeric buttons [1]–[0]. (00–99)
Example: To enter “6”
Press [6] and wait a few moments until the number is
confirmed. Alternatively, press [0] -> [6].
3. Press TEMPO [ (YES)], and then take your finger off
[USER PROGRAM].
4. Enter a name for the user program.
Use FAMILY [ ][ ] to move the cursor, and use SELECT
[ ][ ] to change each character.
5. Press TEMPO [ (YES)].
The screen will show “Complete,” and the settings will be
saved.
We recommend that you frequently store your settings to a user
program even while you’re in the process of editing.
If the KEYBOARD MODE [ARRANGER] or [PIANO] button is
lit, the state of that button will also be saved in the user
program.
The most recently selected music style is also saved in the user
program.
Selecting a User Program
1. Press [USER PROGRAM] so it’s lit.
[NUMERIC] will automatically light.
The display will indicate the number of the most recently
selected user program, or “1” if you have not selected a user
program since turning on the power.
If you hold down [USER PROGRAM], you will be saving
(rather than selecting) a user program.
2. Use TONE category numeric buttons [1]–[0] to enter a user
program number. (00–99)
Example: To enter “6”
Press [6] and wait a few moments until the number is
confirmed. Alternatively, press [0] -> [6].
When you’re finished using the numeric keys, press
[NUMERIC] so it goes out.
The E-09 provides reverb, chorus, and multi-effects (MFX). You can
change the type of each effect.
You can also adjust the amount of reverb or chorus that is applied to
the keyboard parts.
You can’t use chorus together with MFX.
You can apply reverb (reverberation) to the sounds you’re playing.
Reverb simulates the ambience you experience when performing in
a concert hall or other spacious location.
When you switch on the E-09’s power, reverb will be applied to all
keyboard parts (main, dual, split) as well as to the arranger and song
parts.
If you don’t need reverb, you can turn reverb off or set the reverb
amount to “0” for the keyboard parts. You can’t change the amount
of reverb applied to the arranger or to the parts of an already-
recorded song.
If MFX (p. 17) is set to anything other than “Off,” you can apply
that MFX and reverb simultaneously to the tone of the main
part.
Applying Reverb
1. Press [FUNCTION] so it’s lit.
2. Use FAMILY [ ][ ] to select “EFFECTS.”
3. Use SELECT [ ][ ] to select “REVERB.”
4. Use TEMPO [ (-)][ (+)] to select the type of reverb.
User Program
Effects
Reverb
Off Reverb will not be applied.
Room 1–3 These simulate the reverberation of a room.
Higher numbers simulate larger rooms.
Hall 1, 2 These simulate the reverberation of a concert
hall. Higher numbers simulate a larger hall.
These produce deeper reverberation than the
Room settings.
Plate This is a digital simulation of a metal plate re-
verb unit. It is particularly suitable for percus-
sion sounds.
Delay This is a delay effect (without reverb) which
produces echo-like repeats.
PanDelay This repeats the sound while making it alter-
nate between left and right.
E-09_e.book 16ページ ２００５年１１月２１日 月曜日 午前１１時２４分