19

Song Functions

You can use the 16-track recorder to record your own performances.
The E-09 provides the following four recording modes.

The E-09 can handle only one song. This song will not be erased
even if you turn off the power.

“Single” will be automatically selected after you perform the
first recording. Be aware that if you select “ALL” or
“Keyboard,” the previously recorded song will be erased. If you
want to add new material to the song you recorded, you should
choose “Single” or “Punch I/O.” If you haven’t recorded a song
yet, you won’t be able to select “Single” or “Punch I/O.”

You can’t record a song if the E-09 is synchronized with an
external MIDI device.
Here’s how you can record what you play on the keyboard while the
arranger accompaniment plays.

The previously recorded song will be erased by the new
recording.

1.

Press [ARRANGER] so it’s lit. (p. 13)

2.

Press [STYLE] so it’s lit, and select a music style (p. 14).
Alternatively, press [MUSIC ASSISTANT] so it’s lit, and
select a music assistant (p. 15).

3.

Press [INTRO], [ORIGINAL], or [VARIATION] to select the
arranger section you want to use.

4.

Press [START/STOP] so it’s blinking. The arranger will start
playing.

5.

Use TEMPO [ (-)][ (+)] to adjust the tempo of the
arranger.

6.

Press [START/STOP] once again so it goes out. The
arranger will stop playing.

7.

Press [SONG] so it’s lit.

8.

Press [

REC] so it’s blinking.

9.

Use REC MODE [ ][ ] to select “Rec All” as the
recording mode.

10.

Select the tone that you want to use in the right-hand side
of the keyboard.

Press [TONE] so it’s lit, and use the FAMILY and SELECT
[ ][ ] buttons, the numeric keys, or the TONE category
buttons to make your selection. For details, refer to pp. 10–11.

11.

Use either of the following methods to start recording.

Press [ ].
[

REC] lights, and [ ] begins blinking in time with the
time signature of the arranger.
Press [SYNC START] so it’s lit, and play a chord with your left
hand.
[

REC] lights, and [ ] begins blinking in time with the
time signature of the arranger.

12.

Perform.

13.

Use either of the following methods to stop recording.

Press [ ] so it goes out.
[

REC] also goes out.
Press [ENDING].
The ending phrase begins playing. When it ends, [ENDING],
[ ], and [

REC] will all go out.

14.
When you stop recording, the screen prompts “Save
Song?,” asking you whether you want to save your
performance.
To save your performance, press TEMPO [ (YES)].
If you don’t want to save your performance, press TEMPO
[ (NO)].
Here’s how you can record only your keyboard performance. The
arranger is not used.

The previously recorded song will be erased by your new
recording.

1.

Select the keyboard part and tone you want to use for your
performance. (pp. 10–11)

2.

Press [SONG] so it’s lit.

3.

Press [

REC] so it’s blinking.

4.

Use REC MODE [ ][ ] to select “Rec Keyboard” as the
recording mode.

5.

Select the tone that you want to use in the right-hand side
of the keyboard.

Press [TONE] so it’s lit, and use the FAMILY and SELECT
[ ][ ] buttons, the numeric keys, or the TONE category
buttons to make your selection. For details, refer to pp. 10–11.
6.
Use the metronome if desired. (p. 11)
7.
Press [ ] to start recording.
[
REC] lights, and [ ] begins blinking in time with the
time signature of the metronome.
8.
Perform.

If you select a drum set for the main part and use the keyboard
to play the drum sounds, your performance will be recorded on
track 16.

Recording Your Own

Performance

Recording a new song

Rec All Simultaneously record your keyboard perfor-
mance and the arranger accompaniment.
Rec Keyboard Record only your keyboard performance.

Recording additional material into an existing song

Rec Single Record one track at a time. You can freely se-
lect the track to be recorded.
Rec PunchI/O
(punch-in/out)
Re-record a specified region of a certain track.

All Recording Mode

Keyboard Recording Mode

E-09_e.book 19ページ 2005年11月21日 月曜日 午前11時24分