12

&& Various Settings (Function Mode)

Function mode lets you make various settings for this unit.
Basic Operation in Function Mode
Here’s the basic procedure for making settings in Function mode.
1. Hold down the [Key Touch] button and press the [Twin
Piano] button.
The display will indicate “F01” (or F02 – F08); the unit is now in
Function mode.
2. Press the [–] [+] buttons to select the function setting (F01
– F08) that you want to change.
Reference
For details on each function setting (F01 – F08), refer to
“Function Settings” (p. 13).
3. Press the [Metronome] button.
This conrms the function setting that you want to edit; the display
will indicate the value of that setting.
4. Press the [–] [+] buttons to edit the value of the setting.
Reference
For details on the values of each function, refer to “Function
Settings” (p. 13).
MEMO
By pressing the [Metronome] button you can return to the
function setting screen (F01 – F08). If you want to edit other
function settings, repeat steps 2–4.
5. Press the [Key Touch] button or the [Twin Piano] button to
exit Function mode.
Saving the Settings (Memory Backup)
When this unit’s power is turned o, it will return to its default
settings. However, if desired, you can save the following settings
so that they will be remembered even after the power is o. This is
called the “Memory Backup” function.
Settings saved by Memory Backup Page
Key Touch p. 9
Twin Piano Mode p. 8
Reverb p. 9
Brilliance p. 9
Master Tuning p. 13
1. Hold down the [Key Touch] button and press the [Twin
Piano] button.
The display will indicate “F01” (or F02 – F08); the unit is now in
Function mode.
2. Press the [+] button a number of times until “F08” is
shown in the display.
3. Press the [Metronome] button.
The display will indicate “Sur” (Sure?), and the [–] button and [+]
button will blink.
If you decide not to save the settings, press the [–] button.
4. To save the settings, press the [+] button.
When the memory backup has been completed, the display will
indicate “F08.”
5. Press the [Key Touch] button or the [Twin Piano] button to
exit Function mode.