15
DeutschEnglish Français Italiano Español Português Nederlands
&& Restoring the Settings to the Factory Condition (Factory Reset)The settings you’ve changed in Function mode can be restored to
their factory-set condition. This operation is called “Factory Reset.”
NOTE!
The “Factory Reset” operation will erase all settings stored by the
Memory Backup function, as well as all songs you’ve recorded in
internal memory.
1. While holding down the [Key Touch] button and the [Twin
Piano] button, turn on the power.
The display will indicate “Sur” (Sure?), and the [–] button and [+]
button will blink.
If you decide not to execute the Factory Reset operation, press the
[–] button.
2. To execute the Factory Reset, press the [+] button.
When the Factory Reset has been completed, the display will
indicate “End.”
* Never turn o the power before the display indicates “End.”
3. Press the [Power] switch to turn the power o, then on
again.
With the factory settings, the unit’s power will automatically
be switched o 240 minutes (4 hours) after you stop playing or
operating the unit.
If you don’t want the power to turn o automatically, change the
“Auto O” setting to “OFF” as follows.
1. Hold down the [Key Touch] button and press the [Twin
Piano] button.
The display will indicate “F01” (or F02 – F08); the unit is now in
Function mode.
2. Press the [–] [+] buttons to select “F07.”
3. Press the [Metronome] button.
4. Press the [–] [+] buttons to select the Auto O setting.
If you don’t want the power to turn o automatically,
choose “OFF.”
Value Explanation
240 (default)
The power will automatically turn o when 240 minutes
(4 hours) have passed since you last played or operated
the unit.
OFF The power will not turn o automatically.
5. Press the [Key Touch] button or the [Twin Piano] button to
exit Function mode.
MEMO
This setting is remembered even after the power is turned o.
&& Making the Power Automatically Turn O After a Time (Auto O)