30

Effects List

3Band EQ

Standard 3 Band Equalizer

Filter

Cuts high or low frequencies. Drive modulates the cut-off
frequency.

Compressor

Attenuates high-level sounds, & boosts low-level sounds,
compressing the overall variation in volume level.

Enhancer

An Enhancer can sharpen the sound.

Delay

Standard Delay Unit

Parameter Value Comments/
Descriptions

LowGain -12.0dB –
+12.0dB
Low Frequency Level
adjustment
MidFreq 50Hz – 12.5kHz
(1/3oct step)
Mid Frequency
adjustment
MidGain -12.0dB –
+12.0dB
Mid Frequency Level
adjustment
HighGain -12.0dB –
+12.0dB
High Frequency
Level adjustment
TotalLvl -12.0dB –
+12.0dB
EQ’s overall level
adjustment
Dbeam (control
possibilities)
OFF, TRANS,
INVERT
Knob (control
possibilities)
OFF, HGAIN,
MGAIN, LGAIN

Parameter Value Comments/
Descriptions

FilterType LPF, HPF Low Pass Filter, High Pass
Filter
Cutoff 0 – 100
Resonance 0 – 100
Rate 0 – 100
Depth 0 – 100
Drive 0 – 100
Dry:Effect 100:0 –
0:100
Balance of the non-
effected sound and the
effected sound
Dbeam (control
possibilities)
OFF, ZAP,
COLOR,
MODULAT,
DRIVE, MIX
ZAP = cutoff+filtertype,
COLOR = cutoff+reso,
MODULAT = rate+depth,
MIX = Dry/Effect balance
Knob (control
possibilities)
OFF,
CUTOFF,
COLOR,
MODULAT,
DRIVE, MIX

Parameter Value Comments/
Descriptions

Mode AUTO, MANUAL
Sens 0 – 100 Sensitivity of the
compressor
Threshold -60 – +6dB
Ratio 1.0, 1.2, 1.5,
2.0, 2.8, 4.0,
8.0, 16.0, INF:1
Attack 0.25 – 100ms Attack start point
Release 50ms – 2.0s Release point of
compressed sound
Gain -6.0 – +18.0dB
Dbeam (control
possibilities)
OFF, SENS SENS =
Sens+Threthold+
Ratio+Gain
(Only Mode =
MANUAL)
Knob (control
possibilities)
OFF, SENS

Parameter Value Comments/
Descriptions

Sens 0 – 100
Level 0 – 100
EQ Low -12.0 – +12.0dB Boosts low
frequencies
EQ High -12.0 – +12.0dB Boosts high
frequencies
Dbeam (control
possibilities)
OFF, PRESENCE,
LOWCUT
PRESENCE =
Sens+Level+EQ
High,
LOWCUT=
Presence+EQ Low
Knob (control
possibilities)
OFF, PRESENCE,
LOWCUT

Parameter Value Comments/
Descriptions

DelayTime 0.8 – 270ms
Feedback -98 – +98%
LF Damp THRU, 50 –
4000Hz
HF Damp 200Hz –
12.5kHz, THRU
Dry:Effect 100:0 – 0:100 Balance of the non-
effected sound and
the effected sound
HPD-10_e1.book 30ページ 2006年4月7日 金曜日 午後2時14分