Roland HP-7/3 owner manual Error Messages/Other Messages, Display Meaning

Appendices

Case	Cause/Remedy
	On an acoustic piano, notes in the upper one
	and a half octaves of the keyboard continue to
In the upper range,	sound until they decay naturally, regardless of
	the damper pedal. There is a difference in the
the sound changes
	timbre as well. Roland pianos faithfully simu-
abruptly beyond a
	late such characteristics of the acoustic piano.
certain key
	On the HP-7/3, the range that is unaffected by
	the damper pedal will change depending on
	the Key Transpose setting.
	When listening through headphones:
	Some of the more flamboyant and efferves-
	cent piano tones feature an ample high-end
	component, which may make the sound
	appear to have metallic reverberation add-
	ed. Since this reverberation becomes par-
A High-pitched	ticularly audible when supplemented by
	heavy reverb, you may be able to diminish
whine is produced
	the problem by reducing the amount of re-
	verb applied to the sound.
	When listening through speakers:
	Here, a different cause (such as resonance
	produced by the HP-7/3) would be sus-
	pect. Consult your Roland dealer or near-
	est Roland Service Center.

Case	Cause/Remedy
	When listening through speakers:
	Playing at loud volumes may cause instru-
	ments near the HP-7/3 to resonate. Reso-
	nation can also occur with fluorescent light
	tubes, glass doors, and other objects. In
	particular, this problem occurs more easily
	when the bass component is increased, and
	when the sound is played at higher vol-
The bass range	umes. Use the following measures to sup-
sounds odd, or	press such resonance.
there is a vibrating	• Place speakers so they are 10–15 cm from
resonance	walls and other surfaces.
	• Reduce the volume.
	• Move the speakers away from any reso-
	nating objects.
	When listening through headphones:
	Here, a different cause (such as resonance
	produced by the HP-7/3) would be sus-
	pect. Consult your Roland dealer or near-
	est Roland Service Center.
The volume level of	Could you be using a connection cable that
the instrument con-	contains a resistor?
nected to Input	Use a connection cable that does not contain a
jacks is too low	resistor.

Error Messages/Other Messages

Display	Meaning
USr	User. Stores recorded performances (p. 28).
Usr.	The “.” in the display indicates that there is performance material already re-
	corded (p. 28).
d.	Built-in song number (p. 13).
r.	Rhythm number (p. 20).
PU	This appears when a song with a pickup (a song that does not start on the first
	beat) is played back.
dEL	This appears when you attempt to delete a recorded song (p. 27, p. 32).
E.32	The amount of performance information is too large, and further recording is
	not possible.
E.41	A problem such as a loose MIDI cable occurred. Make sure the MIDI cables
	are correctly hooked up.

*Error messages are indicated by an “E.” before the number. Press any button, and you can cancel the error message.

40