38
Recording Your Performance
Re-recording
When you want to re-record, specify the track button whose performance you want to re-record, and
then record again.
When you select a previously recorded track button and re-record, the performance from the location
at which you begin recording up to the location at which you stop recording will be replaced by the
newly re-recorded performance.
* The tempo of the song is stored within the song that was selected. You can slow down the tempo for recording, but
when you play back the performance it will play back at the original tempo.
1
Use the [ (Bwd)] or [ (Fwd)] button to move to the measure that you want
to re-record.
2
Press the [ (Rec)] button.
fig.recmsg1e
3
Choose “Add On.”
With this setting, you can record while listening to the selected song.
fig.recmsg2e
4
Press the track button for the track that you want to re-record.
The indicators of the button you pressed and of the [ (Play/Stop)] button will blink, and the HPi-
7 enters recording-standby mode.
5
Press the [ (Play/Stop)] button to start recording.
After a two-measure count, recording will begin.
When recording begins, the [ (Play/Stop)] button and [ (Rec)] button indicators will light.
Go ahead and perform on the keyboard.
6
Press the [ (Play/Stop)] button to stop recording.
The [ (Play/Stop)] button and the [ (Rec)] button indicators will go out.
The selected item
will be highlighted
in orange. Finalize a choice
Return to the
previous screen
Select a choice
HPi-7_e.book 38 ページ 2005年1月18日 火曜日 午後4時39分