49
Convenient Functions
Undoing Edits (Undo)
You can cancel an editing operation that you’ve just carried out.
This is handy when you want to undo an edit and restore data to
the way it was before.
* There are some edits that can’t be restored.
Editing functions that can be undone appear on screen.
fig.d-e-undo
If you select “Cancel”, the undo is cancelled, and you’re
returned to the Song Edit screen.
If you select “OK”, undone the most recent edit.
Copying Measures (Copy)
You can copy a portion of a performance to a different bar in the
same Part or to a measure in another Part. This is handy when
you’re composing a song that repeats a similar phrase.
fig.e-copy
fig.d-e-copy
Correcting Timing Discrepancies (Quantize)
You can correct for timing discrepancies in a recorded
performance by automatically aligning the music with the
timing you specify. This is called “Quantizing.”
As an example, let’s say that the timing of some quarter-notes in
a performance is a little off. In this case, you can quantize the
performance with quarter-note timing, thus making the timing
accurate.
fig.e-quantizee
fig.d-e-quant
Item Content
From
Measure number of the first measure of the segment
to be copied
For
Number of measures to be copied
Src
Copy-source Track button or part number
Choosing “All” copies all Parts. “---” appears in the
“Dst” column. If you choose a Track button, you can
only copy to the selected Track button. You cannot
copy to the other Track buttons.
Dst
Copy-destination part number
1234567
12345678910
Ex. To copy measures 5-7 to measure 8.
Mode
Data can be copied in the following three ways:
Replace
If there is a performance recorded at the
copy destination, this previous recording
is erased, and the copied data is written in
its place.
Mix
If there is a performance recorded at the
copy destination, the copied data is
layered over the previous recording. If
the Tones used for the copy source and
copy destination are different, the copy-
destination Tone is used.
Insert
If there is a performance recorded at the
copy destination, the copied portion is
inserted without erasing the previous
recording. The song is lengthened by the
number of inserted measures.
To
Copy-destination measure number
When “End” is selected, the data is copied to the end
of the song.
Times
Number of times the data is to be copied
Item Content
1 2 3 4
1 2 3 4
Example: Quarter-note resolution
Example: Sixteenth-note resolution
Actual note data
Note data after quantization
Actual note data
Note data after quantization
HPi-7_e.book 49 ページ ２００５年１月１８日　火曜日　午後４時３９分