Basic Operation
26
[E1]–[E4] knobs
When knob icons are shown in the Lower Part of the screen, the [E1]–[E4] knobs will change the parameter
values of those knob icons.
MEMO
You can assign performance-related functions to knobs [E1]–[E4]. The functions assigned to knobs [E1]–[E4]
can be specied in the Registration Common/Control screen (p. 52).
If you turn an [E1]–[E4] knob while touching the selected knob or slider (i.e., the one enclosed by the green
frame) in the screen, the parameter you touched will be assigned to the knob you turned.
Now you can edit the value by turning the [E1]–[E4] knob.
The parameters assigned to the [E1]–[E4] knobs are indicated by icons E1–E4.
This operation is available in the following screens.
• Registration Part screen (p. 30)
• Registration Eects Routing screen (p. 31)
• Live Set Eects Routing screen (p. 32)
• Synth Tone Edit screen (p. 33)