31
Object Mounting Location for Rotary Scanning
In rotary scanning, the laser light is beamed toward the center of the table. This means that when the object is uneven, the penetration of the
laser light varies greatly according to the object's mounting location. This case takes this point into account and deliberately shifts the
mounted position away from the center. Note that plane scanning may be better suited to an object like this one. At this mounted position,
the back portion is not scanned correctly.
Plaster figure
Rotary scanning
Pitch: 0.6 mm x 1.0 degree
Plaster figure
Mounting position changed un-
der the same conditions.
Scanning of the depression
is enhanced.
Center of
rotation
Depression is a dead angle
for laser light, and so is not
scanned.
4. Case Studies for Better Scanning
Center of
rotation