Roland PK-25A Connections

Connections

The PK-25A is shipped with the expression pedal detached. Before connecting the PK-

25A to another device, please attach the expression pedal.

When attaching or detaching the expression pedal, be careful not to step on a knob bolt. When removing

the knob bolts, place them out of the reach of children. If a knob bolt is accidentally swallowed, consult a

doctor immediately.

To prevent malfunction and/or damage to speakers or other devices, always turn down the volume, and

turn off the power on all devices before making any connections.

The connector in the upper part of the PK-25A is only for connecting the supplied expression pedal.

Connecting this to any device other than the PK-25A’s own expression pedal could result in malfunction.

NOTE

1. Connect the expression pedal cable

to the connector in the upper part of

the PK-25A.

3. Use the three supplied knob bolts to

fasten the expression pedal, making

sure that the bolt holes are aligned.

.While being careful not to pinch the

cable, place the expression pedal on

the PK-25A.

Supplied Knob Bolts

(three point)

View from Rear

Knob bolt

NOTE

PK-25A_e 8ページ２００５年１１月１７日　木曜日　午前１０時２０分