Recording
39
Overview Getting Ready Recording Playback File Operation Computer Appendix
Supplying phantom power
Here’s how to supply phantom power to the
mics connected to the ANALOG IN 1/L jack
and ANALOG IN 2/R jack.
1. Choose [MENU]Ú<INPUT
SETUP>Ú<ANALOG IN>.
2. Touch <INPUT1 PHANTOM> or
<INPUT2 PHANTOM>.
* If you’ve set LINK or MS mic as the input
type, all you need to do for phantom
power to be supplied is to make the
setting [INPUT1 PHANTOM].
3. Touch <ON>.
* Always turn the phantom power o
when connecting any device other than
condenser microphones that require
phantom power to the XLR connector.
You risk causing damage if you
mistakenly supply phantom power to
dynamic microphones, audio playback
devices, or other devices that don’t
require such power. Be sure to check the
specications of any microphone you
intend to use by referring to the manual
that came with it.
(This instrument’s phantom power: 48 V
DC, 10 mA Max)
4. Touch <BACK> twice to return to the
menu screen (p. 18).
MS mic settings
Here’s how to adjust the MS mic’s stereo
width.
1. Choose [MENU]Ú<INPUT
SETUP>Ú<ANALOG IN>.
2. Touch <MS-MIC WIDTH>.
“MS-MIC WIDTH” is located on page 2/2.
Touch to access 2/2.
* The <MS-MIC WIDTH> setting is shown
only if the input type is set to MS mic.