6—Using the S-1608/S-0816 System
S-1608/S-0816 Digital Snake Owner’s Manual 53
Stereo Link The Stereo Link function allows you to link odd/even adjacent S-1608/S-0816 system’s input channel
pairs (1/2, 3/4, etc.). When channels are linked, gain and pad settings made on one channel of the
linked pair will be duplicated on the other. This can be convenient when audio devices with stereo
outputs are connected to the S-1608 or S-0816.
With the S-4000R unlocked, use the following procedure to link a pair of channels:
1. Using the [CHANNEL] knob, select one channel of the pair that you wish to link together. For
example, if you wish to link Channels 7 and 8, choose either “07” or “08”.
2. While holding [CLIP CLEAR / ENTER], turn the [CHANNEL] knob clockwise.
3. Release [CLIP CLEAR / ENTER].
When channels are linked, their channel numbers are displayed with two periods (.), as shown in the
following examples:
fig.6-44.eps
With the S-4000R unlocked, use the following procedure to unlink a channel pair:
1. Using the [CHANNEL] knob, select one channel of the linked pair that you wish to unlink.
2. While holding [CLIP CLEAR / ENTER], turn the [CHANNEL] knob counterclockwise.
3. Release [CLIP CLEAR / ENTER].
Stereo Link Notes • Only odd/even adjacent pairs can be linked (1/2, 3/4, etc.).
• When a channel pair is linked, the current gain and pad settings of the odd-numbered channel
will be copied to the even-numbered channel.
• When a channel pair is unlinked, each channel’s gain and pad settings will remain in the same
state as when they were linked.
• While channels are linked, their phantom power status can still be set independently.
Channels 7 and 8 linked: Channels 23 and 24 linked:
S-1608_e.book 53 ページ ２００７年４月２３日 月曜日 午後１２時５７分